WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

Synthetic POE Refrigeration Oil for OEM and Private Label Orders

De qishanrlubricants November 6th, 2026 24 visualizações

Introduction: OEM and private-label buyers at regional refrigeration brands need a fixed material specification and order brief before label artwork, pack quantities, and shipment terms move into quotation and production. The most practical starting point is a specification that separates published oil data from order-specific packaging and label choices.

A quotation request that states intended pack mix, label language, destination market, and shipment term gives the supplier a complete comparison point. It also makes the first technical review more efficient: the oil grade can be checked once, while pack, label, and delivery details are handled as order scope. For a regional brand, this separation reduces late changes because the material specification remains stable while commercial choices are adjusted.

Synthetic POE Base Oil and ISO VG 68 Specification Language

Synthetic POE base oil is a polyol ester. That chemistry is chosen for HFC and HFO refrigerant systems in commercial chillers, rooftop units, and medium-temperature cold storage. ISO VG 68 is the viscosity grade, defined around kinematic viscosity at 40°C. This product measures 66.6 cSt at 40°C and 9.4 cSt at 100°C. The viscosity index is 120. The 40°C figure identifies the grade a compressor builder expects at normal operating conditions; the 100°C figure shows behavior closer to discharge heat, where the oil film must remain stable. Together, the two viscosity values and the VI give the OEM purchasing lead a compact way to describe the grade in a specification and in a label technical panel. Published values such as flash point 270°C and pour point -39°C define where the grade is most useful. Flash point gives thermal headroom on the discharge side; pour point covers medium-temperature refrigeration and marks the lower edge of the intended range. New oil moisture at 25 ppm and new oil acid value at 0.03 mg KOH/g belong in the quotation specification because they set a baseline for the batch record and technical data sheet. A regional brand can use those values to align the product identity printed on the pack with the batch information kept in its own files. A specification brief works best when it separates fixed product facts from order-specific choices. The fixed facts are the synthetic POE base oil, ISO VG 68 grade, published new-oil values, and HFC/HFO refrigerant scope. The order-specific choices are pack quantities, label language, destination requirements, artwork ownership, and shipment term. This split keeps a grade review from being repeated for every pack size. It also helps the supplier identify which points need artwork approval and which points need production scheduling.

Packaging and Label Scope for OEM and Private Label Orders

The listed pack sizes are 1L, 5L, 20L, and 208L. They cover the common split between a shelf-facing bottle, a workshop pail, and a bulk drum. A 1L bottle suits service top-up and sample presentation; 20L pails fit workshop use; 208L drums support bulk filling and export shipment. Each pack size introduces its own fill line, carton, pallet pattern, and freight calculation. Pack quantities belong in the first quotation request because they change the production plan and the landed cost comparison. A buyer comparing one 208L drum with the same volume split across 20L pails is also comparing handling convenience, storage footprint, and risk of partial-container exposure.

1. Align Pack Sizes With Filling Lines, Cartons, and Freight Planning

A 1L bottle and a 208L drum require different artwork proportions, barcode placement, and warning panels. Choosing pack sizes late forces redesign work across every label and can delay fill-line scheduling. Deciding the mix early fixes the quantities a quotation must be built on and lets the buyer compare the landed cost of one 208L drum with the same volume split across 20L pails. The pack mix also sets carton and pallet quantities, so freight and warehouse handling can be quoted with fewer assumptions. If a custom size matters for a specific market, raise it with the first message so the fill line, carton, and pallet pattern can be reviewed alongside the listed 1L, 5L, 20L, and 208L options.

2. Match Label Copy With Destination Rules and Artwork Ownership

Country-of-origin wording, hazard symbols, language requirements, and net-content format follow the rules of the market where the pack will be sold. Those rules vary enough that one universal label rarely fits every destination. A practical method is to fix the technical panel once—product name, grade, key specifications, batch and lot coding—then treat regulatory and marketing text as a separate layer adjusted per country. This keeps revisions manageable when a brand adds a second market. Private-label artwork should also state who owns the design files, which language version is approved, and whether the supplier prints the brand or receives print-ready files. Reviewing those points with the first pack list prevents a label approval from arriving after the fill line has already been set.

Order Details That Reduce Rework in Private Label Production

Most rework in a private-label run comes from information that arrives late. A label file approved before the pack size was confirmed, a lot code scheme nobody defined, or pallet quantities that do not match the booked container can each hold up production. The minimum order quantity is 10 PCS, payment can run through T/T or L/C, and delivery terms cover EXW, FOB, CFR, and CIF. These terms help a buyer structure a quotation around different shipping arrangements, but the quote becomes precise only when the order brief is complete. A complete quotation request states the product and grade, pack sizes and counts, destination port, preferred incoterm, payment method, target shipment window, label language, and whether artwork is supplied under the buyer’s brand. Include the technical data sheet and safety data sheet request in the same message so registration or customer paperwork can be prepared before the drums ship. If the order includes custom labels or packaging, attach the proposed artwork, pack dimensions, and destination requirements for review. These details let the supplier compare the requested fill, label, and shipping scope against the listed pack options and the 10 PCS minimum. OEM filling and private-label discussions move faster when the material specification, pack list, label scope, and trade term arrive together. That is also the point where custom packaging or label wording is worth checking, because production planning depends on approved artwork and a fixed pack schedule. QISHANR Lubricants reviews OEM filling and private-label requirements on this ISO VG 68 synthetic POE refrigeration oil through inquiry, using the stated grade, pack sizes, MOQ, payment methods, and delivery terms as the basis for a quotation.

Conclusion

The sequence is direct: confirm the material and grade with the published numbers, lock the pack sizes, write the label scope, then request a quotation. A supplier needs the grade, pack list, label scope, and destination port to turn the specification into a quotation. For this ISO VG 68 synthetic POE refrigeration oil, QISHANR Lubricants evaluates OEM filling and private-label requests once the grade, pack list, label scope, and destination port are supplied. When those details arrive together, the first reply can address the actual order scope and the next production step.

FAQ

Q: Which ISO VG 68 synthetic POE specifications should an OEM order confirm before labeling?

A: Confirm the base oil type as synthetic polyol ester and the grade values: 66.6 cSt at 40°C, 9.4 cSt at 100°C, viscosity index 120, flash point 270°C, pour point -39°C, new oil moisture 25 ppm, and acid value 0.03 mg KOH/g. Also confirm HFC and HFO refrigerant scope, the batch coding method, and the exact technical panel that will appear on the label.

Q: Can private label refrigeration oil orders use custom packaging sizes and labels?

A: Listed packs are 1L, 5L, 20L, and 208L. Custom packaging sizes and private-label artwork can be reviewed per order. Send the requested pack sizes, label text, language, destination market, and artwork files so the fill line, carton, and regulatory panel can be confirmed before printing.

Q: What order details should a distributor prepare for a synthetic POE private label quotation?

A: Prepare the product and grade, pack sizes and quantities, artwork ownership and readiness, destination port, preferred incoterm from EXW, FOB, CFR, or CIF, payment method from T/T or L/C, and target shipment window. MOQ is 10 PCS, so build the pallet mix from that baseline and include any custom label or packaging request for review.

Sources / References

Industrial Lubricants - Viscosities vs. ISO-VG Grade

Liquids - Kinematic Viscosities

Gearbox Oil Analysis Case Study

Emkarate RL68H Synthetic POE Refrigeration Oil ISO VG68 for HFC/HFO Compressors, 1L-208L

Moisture Control for POE Refrigeration Oil in Cold Storage
Anteriro
Moisture Control for POE Refrigeration Oil in Cold Storage
Leia mais
https://ueeshop.ly200-cdn.com/u_file/UPBE/UPBE576/2611/09/photo/EmkarateRLseriescover.jpg
Próxima
Emkarate RL Series: ISO Viscosity Grades from RL32H to RL220H
Leia mais
Leave a message
FirstName *
Email *
Message *
Phone
Country
CONTACT US *
Clique para verificar